[스크랩] 요트 한척이 만들어지기까지 4

Turning over the hull - part two

Turning over the hull The hull is slowly turned over along the longitudinal axis. Here, you can get a good look at the inside.

 
 
 

Half-time This is the critical stage because the hull is very instable in this position.

 
 
 

Made it ! The hull has now been turned over, however, now it has to be turned around and set down with the bow in the right direction.

 
 
 

View from above Here, you can begin to see the dimensions of the interior.

 
 
 

Impression from below While the hull is swinging in the air and being turned in the right direction you are provided with some interesting persepectives.

Turning over the hull

Turning over the hull - finishing stage Firstly, the hull has to be set down again for a short while.

 
 
 

Setting down the hull Before we can transport the hull back into the hall with our special vehicle, the hull is carefully placed down on matresses so that the cranes can be cleared away.

 
 
 

Quite high Even when the hull is sitting flat on the ground, it is still impressively high.

 
 
 

Moving the hull Finally, the hull is moved back into the hall. In the case of very long yachts, this is a very time-consuming process.

 
 
 

View of the bow Here, you can see the special reinforcements on the hull for attaching the shroud. The hull is positioned vertically straight in the block, so that work on the inside can continue.

 

The empty hull

Hull After the deck beams have been mounted, this is what your yacht looks like.

 
 
 

View We invite you to this phase. It is fascinating to see the inside of your empty yacht in all its splendour.

 
 
 

Foto: Yachtbild - Kai Greiser www.yachtbild.de

Long sight On these photos you can clearly recognise the floor timbers for reinforcing the hull and the ribs.

 
 
 

Foto: Yachtbild - Kai Greiser www.yachtbild.de

Insight Some yacht owners would be happy to leave their yacht just the way it is now.

Surveillance of the yacht hull

Surveillance of the hull Here, you can recognise the camber of beam, the concavity of the deck to the sides.

 
 
 

Raw frame Through the visible bulkheads you can already recognise the arrangement of the searooms.

 
 
 

Foto: Yachtbild - Kai Greiser www.yachtbild.de

Insight The "whole view" gives you an idea of the size of the yacht and the arrangement on and below the deck.

Tools for building wooden boats

Foto: Yachtbild - Kai Greiser www.yachtbild.de

Tools An array of different tools is used for the various types of woodwork.

 
 
 

Clamps There is hardly any other tool that is used as often or for as many jobs in boat building.

Working on the yacht

Work We often have to sand particular parts into the right shape.

 
 
 

Marking Anything which is over and above what it should be or which does not meet with our approval is measured and marked for sanding and planing.

 

출처 : 팀 드레이크 [TEAM DRAKE]

글쓴이 : 스키퍼 원글보기

메모 :